- ページ 6

計測機器 akkuteam VAS 5581のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。akkuteam VAS 5581 17 ページ。 Hv measurement adapter

ページを印刷する

Operating Instructions

HV Measurement Adapter VAS 5581

Safety labeling

Devices with the CE marking meet the basic requirements

of the low-voltage and electro-magnetic compatibility

directive.

Devices marked with this TÜV test seal meet the

requirements of the applicable standards for Canada

and the USA.

Devices marked with this TÜV test seal meet the

requirements of the applicable standards for Japan.

Devices marked with this TÜV seal and the markings

indicated on the rating plate meet the requirements of

the applicable standards for Australia.

Disposal

Do not discard this device in the household waste! As per the

European Directive 2002/96/EC for waste electrical and electronic

devices and its implementation into national law, discarded electrical

devices must be separated and recycled in an environmentally

compatible manner. Ensure that your used equipment is returned

to your dealer or obtain information about a local, authorized

collection and disposal system. Ignoring this EU directive can have

a potentially negative impact on the environment and your health.

The copyright to this operating manual remains with the manufac-

turer. The text and figures correspond to the technical status at the

time of printing. Modifications made without notice. The content of

the operating manual establishes no claims of any kind by the buyer.

We appreciate suggestions for improvement and for any errors in the

operating manual.

www.akkuteam.de

1.1 Instructions for the manual

State of the art

This HV Measurement Adapter corresponds to the current state of the

art. Proper and safety-conscious operation is required to operate the

device safely.

Read the operating manual

Carefully read the operating manual before using the HV

Measurement Adapter. The operating manual must be observed at all

times.

Action

All actions required to correctly operate the unit are described in the

operating manual and in the referenced documents.

Any other practices not explicitly approved by the manufacturer may

not be employed.

The intended protection may be impaired if the unit is not used

as per the operating manual.

General instructions

Inspections, assembly and repair work may only be performed by

personnel trained by the manufacturer. When malfunctions occur, only

those malfunctions may be corrected in-house that have been marked

for the corresponding maintenance processes in the manufacturer's

training documentation.

V 1.0