djpower 114082 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Kabut djpower 114082. djpower 114082 12 halaman.

Halaman Cetak

Fog machine PT-1500 Art.No

Never use solvents or aggressive detergents

Never use solvents or aggressive detergents for cleaning. Use instead of this a

damped cleaning rag.

To prevent damages during transport use for transport the original packing or

provided accessories.

For reasons of safety unauthorized changes are forbidden!

A usage of the device which differs from usages which are described in this

A usage of the device which differs fr

manual can cause damages of the device. In this case the warranty expires.

Additional you should notice that every different usage is related with

dangers and can cause e.g. an electrical short, fire, electric shock or crash.

dangers and can cause e.g. an electrical short, fire, electric shock o

2.1. Overhead installation

Overhead installation

Danger of life!

You have to observe the regulations of BGV C1 (formerly VBG

70) and EN60598

70) and EN60598-2-17 Installations are to carry out by skilled

personnel only.

The suspension devices have to be build and measured so they can

withstand for an hour the tenfold of the payload without suffering a

permanent detrimental deformation.

Basically installation has to be made by using a second separate suspension.

This can be e.g. a suitable net. The second suspension must be designed an

This can be e.g. a suitable net. The second suspension must be designed and

This can be e.g. a suitable net. The second suspension must be designed an

attached so no part of the installation can fall down in case of failure.

During construction, reconstruction and deconstruction unnecessary stay in

the range of moving areas, on lightning bridges, under elevated work stations

or any other danger zones i

or any other danger zones is forbidden.

The operator is obliged to following safety

The operator is obliged to following safety-related and mechanical facilities:

• Before the first start

Before the first start-up or after critical changes before restarting it has

to be checked by an expert.

• Review in the frame of the inspection test at least all

Review in the frame of the inspection test at least all four years by an

expert. .

• Review by a qualified person at least once a year.

Review by a qualified person at least once a year.

How to carry out the overhead installation:

Ideally the device should be installed outside lounge areas of people.

IMPORTANT! Overhead installation requires a high level of exp

Overhead installation requires a high level of experience. This

includes knowledge of calculating the payload, used installation material

and safety inspections of the used material and the projector whereas the

required experience is not limited to this. Do not try to carry out installation

yourself under any circumstances if you are not qualified. Contact a

r any circumstances if you are not qualified. Contact a

professional installer. An inappropriate installation can lead to injuries and/or

damaged properties.

Art.No.: 114082

om usages which are described in this

Installations are to carry out by skilled

up or after critical changes before restarting it has

5 / 12

for cleaning. Use instead of this a

related and mechanical facilities:

four years by an

erience. This