djpower 114082 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Kabut djpower 114082. djpower 114082 12 halaman.

Halaman Cetak
Fog machine PT-1500 Art.No
It is not allowed to install the device in the grip area of people.
It is not allowed to install the device in the grip area of people.
It is not allowed to install the device in the grip area of people.
If the device may hang from the ceiling or from high beams, the use of truss
If the device may hang from th
systems is mandatory. The device may not be installed so it can swing freely in
systems is mandatory. The device may not be installed so it can swing freely in
systems is mandatory. The device may not be installed so it can swing freely in
the room.
Please note: Crashing down items can cause serious injuries! Do not install the
Please note: Crashing down items can cause serious injuries! Do not install the
Please note: Crashing down items can cause serious injuries! Do not install the
projector, if you doubt the safety of a possible installation form!
projector, if you doubt the safety of a
Before installation make sure that the mounting surface has the ability to carry
Before installation make sure that the mounting surface has the ability to carry
Before installation make sure that the mounting surface has the ability to carry
the tenfold point load of the own weight of the device.
the tenfold point load of the own weight of the device.
Mount the device with the mounting-bracket to your trussing system using an
Mount the device with the mounting
appropriate clamp.
During overhead installation the device must be always secured by a safety
During overhead installation the device must be always secured by a safety
During overhead installation the device must be always secured by a safety
rope which is designed to hold the twelvefold weight of device. Only safety
rope which is designed to hold the twelvefold weight of device. Only safety
rope which is designed to hold the twelvefold weight of device. Only safety
ropes with quick-release safety fastener elements may be used. Hang up the
release safety fastener elements may be used. Hang up the
release safety fastener elements may be used. Hang up the
safety rope in the hole of the mounting bracket. Direct the rope over the truss
or an appropriate fastening point. Hang up the end in the fastening element
or an appropriate fastening point. Hang up the end in the fastening element
or an appropriate fastening point. Hang up the end in the fastening element
and tie up the locking nut. A safety rope once exposed to failing load or
and tie up the locking nut. A safety rope once exposed to failing load or
and tie up the locking nut. A safety rope once exposed to failing load or
damaged may not be used furthermore.
damaged may not be used furthermore.
The maximum drop exceed must not exceed 20cm.
op exceed must not exceed 20cm.
A safety rope once exposed to failing load or damaged may not be used
A safety rope once exposed to failing load or damaged may not be used
A safety rope once exposed to failing load or damaged may not be used
furthermore. Adjust the desired inclination angle via the mounting bracket
Adjust the desired inclination angle via the mounting bracket
Adjust the desired inclination angle via the mounting bracket
and tighten the screw.
2.2. Electrical connections
Electrical connections
Connect the fixture to the mains with the enclosed power cable and plug.
Connect the fixture to the mains
The earth has to be connected.
The earth has to be connected.
Cable (EU)
Brown
Light blue
Yellow/Green
Art.No.: 114082
e ceiling or from high beams, the use of truss
bracket to your trussing system using an
f the mounting bracket. Direct the rope over the truss
f the mounting bracket. Direct the rope over the truss
with the enclosed power cable and plug.
Cable (US)
Cable (US)
Black
Black
White
White
Green
Green
6 / 12
possible installation form!
Pin
Live
Neutral
Earth
International
International
L
N