AKM AKD4201-C Panduan Pemesanan - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemesanan untuk Motherboard AKM AKD4201-C. AKM AKD4201-C 17 halaman. Evaluation board for the stereo headphone / lineout amplifier

Halaman Cetak

Outline Chart

Comment

(1) J2 (LIN / RIN): Mimi-Jack

It is a jack of analog input signals LIN / RIN. These signals are input to LIN pin / RIN pin.

(2) J3 (LOUT / ROUT): Mimi-Jack

It is a jack of analog output signals LOUT / ROUT. These signals are output from LOUT pin / ROUT pin.

(3) TM1 (5V / 3.3V): Terminal

It is a power supply terminal of 5V / 3.3V. It should be connected to power supply 5V/3.3V.

For further details, refer to P3. "Set up the power supply lines".

(4) TM2 (GND): Terminal

It is a ground terminal. It should be connected to GND.

For further details, refer to P3. "Set up the power supply lines".

(5) SW1 (PDN): Toggle Switch

It is a power down switch of AK4201. This should be set to H, after all power supply pins are supplied.

Board Outline Chart

Figure 2. AKD4201-C Outline Chart

- 2 -

VSS

Rout

[AKD4201-C]

Lout

2009/02