AKM AKD4201-C Bestelhandleiding - Pagina 2

Blader online of download pdf Bestelhandleiding voor {categorie_naam} AKM AKD4201-C. AKM AKD4201-C 17 pagina's. Evaluation board for the stereo headphone / lineout amplifier

Outline Chart
Comment
(1) J2 (LIN / RIN): Mimi-Jack
It is a jack of analog input signals LIN / RIN. These signals are input to LIN pin / RIN pin.
(2) J3 (LOUT / ROUT): Mimi-Jack
It is a jack of analog output signals LOUT / ROUT. These signals are output from LOUT pin / ROUT pin.
(3) TM1 (5V / 3.3V): Terminal
It is a power supply terminal of 5V / 3.3V. It should be connected to power supply 5V/3.3V.
For further details, refer to P3. "Set up the power supply lines".
(4) TM2 (GND): Terminal
It is a ground terminal. It should be connected to GND.
For further details, refer to P3. "Set up the power supply lines".
(5) SW1 (PDN): Toggle Switch
It is a power down switch of AK4201. This should be set to H, after all power supply pins are supplied.
<KM097401>
Board Outline Chart
Figure 2. AKD4201-C Outline Chart
- 2 -
VSS
Rout
[AKD4201-C]
Lout
2009/02