1-CUBE SU 6.2. Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Termostat 1-CUBE SU 6.2.. 1-CUBE SU 6.2. 13 halaman. Water thermostat

Halaman Cetak
same way the temperature of point 2, the temperature of point 3, the temperature of point 4, the temperature of
point 5, the temperature of point 6, the temperature of point 7 and by pressing the key OFF the control of the
adjusted curve starts running. There is displayed the required temperature on the first line of the display and the time
runned off from the beginning of the test and real temperature on the second line of the display. The algorithm is
stopped by pressing the key OFF.
0
Temperature (
C)
0
40
C
0
34
C
0
30
C
0
25
C
10
Example of the curve adjustement according to picture:
time of point 1=10, time of point 2=30, time of point 3=40, time of point 4=65, time of point 5=80, time of point
6=105, time of point 7=125,
temperature of point 1=30, temperature of point 2=30, temperature of point 3=34, temperature of point 4=34,
temperature of point 5=40, temperature of point 6=40, temperature of point 7=25,
Method Calibration:
It is necessary to check the measurement accuracy with the help of etalon once in a six months. If the temperature of
the bath does not correspond to the temperature measured with the etalon it is necessary to recalibrate the
temperature sensor. The temperature sensor is calibrated only if it is really necessary because the equipment is
optimally calibrated by manufacturer.
Calibration Procedure:
It is necessary to calibrate two temperatures in the opposite ends within device temperature range for the right
measurement of the Water Bath - The lower temperature (for example about 5 degrees Celsius) and the upper
temperature (about 70 degrees Celsius).
30
40
65
80
9
105
125
Time(min.)