DNF Controls 2MCE-24P Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol DNF Controls 2MCE-24P. DNF Controls 2MCE-24P 19 halaman. Two machine, cuts only editor with 24p editing capability

Halaman Cetak
f.

PERFORM AN OFF SPEED EDIT

1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
10
2MCE-24P, Two Machine, Cuts Only Editor
Select the PLAYER
VTR.
Press [OFF SPEED]. The OFF SPEED indicator will turn on.
(Press [OFF SPEED] again to disable off speed edit.)
Turn the wheel to select the PLAYER's playback speed.
Select +0.00 for STILL frame.
(To slo-mo the VTR and select a slo-mo speed, press [SHIFT] + [OFF
SPEED]. Turn the wheel. Press [STOP] when done.)
Set the IN point by manually entering a time using the numeric
OR
By pressing
[IN]
and marking the current tape time.
The PLAYER OUT Point is ignored.
Select the
RECORDER.
Set the IN point by manually entering a time using the numeric
OR
By pressing
[IN]
and marking the current tape time.
Set the optional OUT Point by manually entering a time, using the numeric
keyboard.
OR
By pressing
[OUT]
and marking the current tape
OR
By pressing
[SHIFT]
+ [OUT].
The display will show the current RECORDER duration.
Manually enter the desired duration using the numeric keypad.
Press
[OUT]
to save the entered
OR
Press
[ESC]
to exit without saving the
Press
[REC]
to perform the edit.
The PLAYER will cue to the IN time.
The RECORDER will preroll.
The PLAYER will Slo-Mo at the selected speed.
The RECORDER will go into play.
At the IN point, the RECORDER will go into record.
At the OUT time, the RECORDER will terminate record.
During the Edit, turn the wheel to change the Slo-Mo speed.
During the edit in INSERT mode,
Press the Softkeys to punch desired channels into and out of record.
time.
duration.
entered
duration.
keyboard.
keyboard.