DNF Controls 2MCE-24P Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol DNF Controls 2MCE-24P. DNF Controls 2MCE-24P 19 halaman. Two machine, cuts only editor with 24p editing capability

Halaman Cetak
4.

OPERATION

a.

TRIM AN IN/OUT POINT

1)
2)
3)
b.

CLEAR AN OUT POINT

Press [CLR
The OUT key indicator will turn off.
The OUT Point
c.

GOTO IN/OUT POINTS

1)
2)
3)
d.

CRASH RECORD

NOTE: Check the Record option in the Setup Menu. It should be set to Crash Record.
1)
2)
3)
8
2MCE-24P, Two Machine, Cuts Only Editor
Press
[TRIM+]
or [TRIM –].
The display will prompt "Enter Time, Select
Enter the amount of trim using the numeric keypad.
The top row of the display will show the entered amount.
Press
[IN]
to trim the IN Point.
Press
[OUT]
to trim the OUT Point.
The trimmed time will be displayed on the bottom row of the display.
OUT]
to clear the OUT point.
on Recorder and Player
Press [GOTO]. The GOTO key Indicator will turn on.
The display will prompt for IN or OUT.
Press [IN] to goto the IN Point.
Press [OUT] to goto the OUT Point.
OR
Press [ESC] to exit without searching.
Select the Recorder.
Press [SHIFT] + [RECORD] if the option in the Setup Menu is set to Rec only.
Press [RECORD] + [PLAY] if the option in the Setup Menu is set to Rec +
Play.
The record VTR will begin recording immediately.
There is no preroll in the Crash Record mode.
The RECORD key indicator will turn on.
Press [STOP] to end recording. RECORD indicator turns off.
IN/OUT."
will be cleared to 00:00:00:00.