Aion Electronics CYGNUS Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Pedal Musik Aion Electronics CYGNUS. Aion Electronics CYGNUS 11 halaman.

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended

to first use a center punch for each of the holes to help guide the drill bit.

Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring

the scale on the printed page.

Top jack layout assumes the use of closed-frame jacks like the

open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.

LED hole drill size assumes the use of a

size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.

INCH

You'll have to bend it back so it fits the drill hole. It will be fixed in the next revision of the PCB.

CYGNUS DISTORTION/SUSTAINER

5mm LED

OUT

VOLUME

x: -0.65, y: +1.71

ø9/32"

LED

x: -0.775, y: -1.775

ø5/16"

Note: On version 1 of the Cygnus, the LED is slightly misaligned from the drill template.

bezel, available from several parts suppliers. Adjust

125B

0.625"

ø3/8"

ø1/2"

SUSTAIN

x: 0.65, y: +1.71

ø9/32"

TONE

x: 0, y: +0.66

ø9/32"

CENTER (0,0)

FOOTSWITCH

x: 0, y: -1.775

ø15/32"

Switchcraft

111X. If you'd rather use