3M SCP740 Panduan Operator - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Operator untuk Proyektor 3M SCP740. 3M SCP740 11 halaman. Super close projection system
Juga untuk 3M SCP740: Panduan Keamanan Produk (5 halaman), Spesifikasi (2 halaman), Spesifikasi (2 halaman)
Halaman Cetak
'.-\l"'-' 'wiipyi ("In-~.l_' l'm_iculli~li .'i_\~-.lt:ni
AwARNING
In Lamp replacement caution. Before removing the screws. discon-
nect the power cable. Hot surface inside. Allow 1 hour to cool
before replacing the lamp. Handle with care. Risk of explosion.
See Owner's Manual.
0 Unplug the projector from the electrical outlet and allow the lamp
to cool for 60 minutes before replacing the lamp.
u Wait at least 30 minutes for the lamp assembly to cool before
replacing.
in Always handle the fragile lamp module with care.
0 In the event of a lamp rupture. calla 3M authorized service pro-
vider for repair. Ruptured lamp is not user serviceable.
o Ventilate the area where the lamp rupture occurred. The lamp
operates at high pressure and temperature.
0 Replace the lamp module when the lamp replacement message
appears.
a Never replace the lamp module with a previously used lamp
module.
in Hg: Lamp contains mercury. Don't throw in trash. Dispose ac-
cording to local, state. or federal laws. See www.|amprecycie.org
or call 1-800-328-1371.
0 Wash your hands thoroughly if contact with ruptured lamp debris
has taken place.
a Ventilate the area where the lamp rupture occurs. The lamp oper-
ates at high temperature.
~
Iliil.'-..
'\|| |':l'_'|I|', l-'.c~-t'l\t'al