3M SCP740 Manuale dell'operatore - Pagina 10

Sfoglia online o scarica il pdf Manuale dell'operatore per Proiettore 3M SCP740. 3M SCP740 11. Super close projection system
Anche per 3M SCP740: Manuale di sicurezza del prodotto (5 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine)

'.-\l"'-' 'wiipyi ("In-~.l_' l'm_iculli~li .'i_\~-.lt:ni

AwARNING

In Lamp replacement caution. Before removing the screws. discon-

nect the power cable. Hot surface inside. Allow 1 hour to cool

before replacing the lamp. Handle with care. Risk of explosion.

See Owner's Manual.

0 Unplug the projector from the electrical outlet and allow the lamp

to cool for 60 minutes before replacing the lamp.

u Wait at least 30 minutes for the lamp assembly to cool before

replacing.

in Always handle the fragile lamp module with care.

0 In the event of a lamp rupture. calla 3M authorized service pro-

vider for repair. Ruptured lamp is not user serviceable.

o Ventilate the area where the lamp rupture occurred. The lamp

operates at high pressure and temperature.

0 Replace the lamp module when the lamp replacement message

appears.

a Never replace the lamp module with a previously used lamp

module.

in Hg: Lamp contains mercury. Don't throw in trash. Dispose ac-

cording to local, state. or federal laws. See www.|amprecycie.org

or call 1-800-328-1371.

0 Wash your hands thoroughly if contact with ruptured lamp debris

has taken place.

a Ventilate the area where the lamp rupture occurs. The lamp oper-

ates at high temperature.

Iliil.'-..

'\|| |':l'_'|I|', l-'.c~-t'l\t'al