3M WX20 - Digital Projector WXGA LCD Panduan Keamanan Produk - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Keamanan Produk untuk Proyektor 3M WX20 - Digital Projector WXGA LCD. 3M WX20 - Digital Projector WXGA LCD 17 halaman. Digital projector
Juga untuk 3M WX20 - Digital Projector WXGA LCD: Lembar Spesifikasi (2 halaman), Panduan Teknis (6 halaman)

Halaman Cetak

3M WX20 - Digital Projector WXGA LCD Panduan Keamanan Produk

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by

arrow) . (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place. Tighten the

screw

Optional Lamp: 78-6969-9946-1

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

Note

(Contact 3M Customer Service.)

(DT00821)

Note

(2) Lamp access door

3M™ Digital Projector WX20 Product Safety Guide

(3) Screws

(4) Handle