3M WX20 - Digital Projector WXGA LCD 제품 안전 매뉴얼 - 페이지 12

{카테고리_이름} 3M WX20 - Digital Projector WXGA LCD에 대한 제품 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M WX20 - Digital Projector WXGA LCD 17 페이지. Digital projector
3M WX20 - Digital Projector WXGA LCD에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기술 매뉴얼 (6 페이지)

페이지 인쇄

3M WX20 - Digital Projector WXGA LCD 제품 안전 매뉴얼

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by

arrow) . (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place. Tighten the

screw

Optional Lamp: 78-6969-9946-1

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

Note

(Contact 3M Customer Service.)

(DT00821)

Note

(2) Lamp access door

3M™ Digital Projector WX20 Product Safety Guide

(3) Screws

(4) Handle