Doepke Dupline Panduan Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Relai Doepke Dupline. Doepke Dupline 8 halaman. 8-way relay output dsm 8

Halaman Cetak

Doepke

Terminal

1.3

Dupline signal conductor -

(Dupline-)

1.4

0 VDC operating voltage

Short circuits between Dupline signal conductors and the 24 V operating voltage or con-

nections to the grounding lead to malfunction and are not allowed. The correct polarity

of operating voltage and Dupline signal conductors has to be ensured.

In order to meet the requirements for protective low voltage, VDE0100, Part 410, should

be observed and put into practice during installation.

When connecting please observe that the maximum torque of the terminals of 0.6 Nm

will not be exceeded.

The patented click-and-lock-mechanism allows an easy removal of the unit from the rail

by pushing the housing upwards until it is released.

10. Indicators

Indicator

Green "BUS OK"

LED

8 red LED „EIN"

11. Guarantee

All professionally installed, unaltered devices are covered by warranty during the statu-

tory guarantee period from the day of purchase by the end user. The guarantee is not ap-

plicable to damage incurred during transport or caused by short-circuit or overloading. In

the event of defects in workmanship or material, which are discovered within the guar-

antee period, the company will provide a replacement free of charge. The guarantee will

be rendered null and void if the device is opened or tampered with.

12. Technical Data

Dupline

Outputs

Load capacity (per output)

3931182/07/08/F - The right to make technical changes reserved!

Description

Dupline bus:

Off - bus fault / On - bus OK

All-or-nothing relay 1..8:

Off - Relay open / On - Relay closed

Current input

Input channels None

Output channels 8 control channels (Switching relay outputs 1..8)

Type All-or-nothing relay

Voltage

Terminal

1.7

Dupline signal conductor + (Du-

pline+)

1.8

+24 VDC operating voltage

Description

Min.

Typ.

10 µA

12 VAC

100 mA

Description

Max.

250 VAC

16 A