Doepke Dupline Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przekaźniki Doepke Dupline. Doepke Dupline 8 stron. 8-way relay output dsm 8
Drukuj stronęDoepke
Terminal
1.3
Dupline signal conductor -
(Dupline-)
1.4
0 VDC operating voltage
Short circuits between Dupline signal conductors and the 24 V operating voltage or con-
nections to the grounding lead to malfunction and are not allowed. The correct polarity
of operating voltage and Dupline signal conductors has to be ensured.
In order to meet the requirements for protective low voltage, VDE0100, Part 410, should
be observed and put into practice during installation.
When connecting please observe that the maximum torque of the terminals of 0.6 Nm
will not be exceeded.
The patented click-and-lock-mechanism allows an easy removal of the unit from the rail
by pushing the housing upwards until it is released.
10. Indicators
Indicator
Green "BUS OK"
LED
8 red LED „EIN"
11. Guarantee
All professionally installed, unaltered devices are covered by warranty during the statu-
tory guarantee period from the day of purchase by the end user. The guarantee is not ap-
plicable to damage incurred during transport or caused by short-circuit or overloading. In
the event of defects in workmanship or material, which are discovered within the guar-
antee period, the company will provide a replacement free of charge. The guarantee will
be rendered null and void if the device is opened or tampered with.
12. Technical Data
Dupline
Outputs
Load capacity (per output)
3931182/07/08/F - The right to make technical changes reserved!
6
Description
Dupline bus:
Off - bus fault / On - bus OK
All-or-nothing relay 1..8:
Off - Relay open / On - Relay closed
Current input
Input channels None
Output channels 8 control channels (Switching relay outputs 1..8)
Type All-or-nothing relay
Voltage
Terminal
1.7
Dupline signal conductor + (Du-
pline+)
1.8
+24 VDC operating voltage
Description
Min.
Typ.
10 µA
12 VAC
100 mA
Description
Max.
250 VAC
16 A