Dog trace d-control 440 Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan Dog trace d-control 440. Dog trace d-control 440 19 halaman. Electronic vibration training collar
Halaman Cetak
Light
For an easy localization of your dog in the dark, this function provides 8 different modes of LED light.
The LED - diodes are placed in the transparent receiver housing of the collar.
Mode
Press of the button
0
short/permanent
1
short/permanent
2
short
2
permanent
repetitive press
3
short
3
permanent
4
5
6
7
NOTICE: By modes 3 and 6 do not forget to switch off flashing by pressing the light button
Modes 4–7 can be used for differing second dog in darkness.
Setting the modes: Press a dog selection button
with the required receiver) until symbol A or B starts flashing on the LCD. Set the required mode
number (0–7) using the buttons with the arrows
or
again. The transmitter allows you to set a different interval of flashing when using two
collars at the same time so you can easily spot your dogs according to the flashing interval (example:
dog A - mode 1 and dog B - mode 6).
Choice of the light mode
Function
1× single flash
flashing as long as the button is pressed
10× flashes
shines as long as button pressed and follows 10× flashes
stops the function ahead of time
1× flash every 5 seconds
shines as long as button pressed and follows 1× flash every 5 seconds
same function as mode 0 with a diff erent flashing frequency
same function as mode 1 with a diff erent flashing frequency
same function as mode 2 with a diff erent flashing frequency
same function as mode 3 with a diff erent flashing frequency
/
or
(depending on which button is paired
Confirm the selection by pressing button
15