Dog trace d-control 440 사용자 설명서 - 페이지 15

{카테고리_이름} Dog trace d-control 440에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dog trace d-control 440 19 페이지. Electronic vibration training collar

Light

For an easy localization of your dog in the dark, this function provides 8 different modes of LED light.

The LED - diodes are placed in the transparent receiver housing of the collar.

Mode

Press of the button

short/permanent

short

permanent

repetitive press

short

permanent

NOTICE: By modes 3 and 6 do not forget to switch off flashing by pressing the light button

Modes 4–7 can be used for differing second dog in darkness.

Setting the modes: Press a dog selection button

with the required receiver) until symbol A or B starts flashing on the LCD. Set the required mode

number (0–7) using the buttons with the arrows

again. The transmitter allows you to set a different interval of flashing when using two

collars at the same time so you can easily spot your dogs according to the flashing interval (example:

dog A - mode 1 and dog B - mode 6).

Choice of the light mode

Function

1× single flash

flashing as long as the button is pressed

10× flashes

shines as long as button pressed and follows 10× flashes

stops the function ahead of time

1× flash every 5 seconds

shines as long as button pressed and follows 1× flash every 5 seconds

same function as mode 0 with a diff erent flashing frequency

same function as mode 1 with a diff erent flashing frequency

same function as mode 2 with a diff erent flashing frequency

same function as mode 3 with a diff erent flashing frequency

(depending on which button is paired

Confirm the selection by pressing button