Dog trace d-control 500 mini Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan Dog trace d-control 500 mini. Dog trace d-control 500 mini 20 halaman. Electronic training collar
Juga untuk Dog trace d-control 500 mini: Panduan Pengguna (19 halaman)

Halaman Cetak

Transmitter - button functions

The Dogtrace d–control transmitters are designed to operate with two separate receivers (dog 1 and

dog 2). The selected level of stimulations can be different for each receiver

Button

- Tone signal

The receiver emits a beeping noise when a „Tone button" is pressed. If the button is not released after

30 seconds, the tone will automatically turn off. While pressing, an indicator of the radio transmission

will appear on the LCD display of the transmitter; the indicator light on the receiver goes from flashing

green to permanent green for as long as the button is pressed.

Pressing the

„Stimulation button" activates a special type of stimulation in the receiver

consisting of safe stimulating impulses transmitted by two contact points installed in the receiver. You

can choose between momentary (nick) and continuous stimulation (if the button is not released after 4

seconds, the stimulation will automatically turn off as a safety feature). It is possible to adjust the

intensity of the stimulation very easily by the Up/Down control buttons. The receiver will be ready to be

reactivated once the button has been released. While pressing, an indicator of the radio transmission

will appear on the LCD display of the transmitter; the indicator light on the receiver goes from flashing

green to permanent red for as long as the button is pressed. You can select a momentary stimulation

(option A) or a continuous stimulation (option B) by pressing

the selection button

repeatedly; if the second receiver is used, press repeatedly the selection

button

to select momentary or continuos stimulation.