Dog trace d-control 500 mini Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Dog trace d-control 500 mini. Dog trace d-control 500 mini 20 сторінок. Electronic training collar
Також для Dog trace d-control 500 mini: Посібник користувача (19 сторінок)
Друкувати сторінкуTransmitter - button functions
The Dogtrace d–control transmitters are designed to operate with two separate receivers (dog 1 and
dog 2). The selected level of stimulations can be different for each receiver
Button
- Tone signal
The receiver emits a beeping noise when a „Tone button" is pressed. If the button is not released after
30 seconds, the tone will automatically turn off. While pressing, an indicator of the radio transmission
will appear on the LCD display of the transmitter; the indicator light on the receiver goes from flashing
green to permanent green for as long as the button is pressed.
Pressing the
„Stimulation button" activates a special type of stimulation in the receiver
consisting of safe stimulating impulses transmitted by two contact points installed in the receiver. You
can choose between momentary (nick) and continuous stimulation (if the button is not released after 4
seconds, the stimulation will automatically turn off as a safety feature). It is possible to adjust the
intensity of the stimulation very easily by the Up/Down control buttons. The receiver will be ready to be
reactivated once the button has been released. While pressing, an indicator of the radio transmission
will appear on the LCD display of the transmitter; the indicator light on the receiver goes from flashing
green to permanent red for as long as the button is pressed. You can select a momentary stimulation
(option A) or a continuous stimulation (option B) by pressing
the selection button
repeatedly; if the second receiver is used, press repeatedly the selection
button
to select momentary or continuos stimulation.
10