Dogtra YS 600 Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Produk Perawatan Hewan Peliharaan Dogtra YS 600. Dogtra YS 600 17 halaman.
Halaman Cetak
- 1. Table of Contents
- 2. At a Glance
- 3. Main Features
- 4. Overview
- 5. How to Use the On/Off & Intensity Dial
- 6. The LED Indicator
- 7. Operating Modes
- 8. The Persistent Bark Indicator
- 9. Testing the YS600
- 10. Charging the Battery
- 11. Collar Fitting
- 12. Troubleshooting Guide
- 13. Warranty and Repair Information
Charging the Battery
1. Open the rubber plug on the YS600 and connect the charger to
the battery charging receptacle as shown in the picture.
2. Plug the charger into an electrical power outlet (110V).
3. While the battery is recharging, the LED will stay on red. The
LED light will become green when the battery is completely
recharged (the battery is fully charged after 2 hours).
Note: Only use Dogtra approved Lithium Polymer Battery
chargers designed for the YS600. Non-Dogtra chargers could
potentially damage the unit.
10