Dogtra YS 600 소유자 매뉴얼 - 페이지 11
{카테고리_이름} Dogtra YS 600에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra YS 600 17 페이지.
페이지 인쇄
- 1. Table of Contents
- 2. At a Glance
- 3. Main Features
- 4. Overview
- 5. How to Use the On/Off & Intensity Dial
- 6. The LED Indicator
- 7. Operating Modes
- 8. The Persistent Bark Indicator
- 9. Testing the YS600
- 10. Charging the Battery
- 11. Collar Fitting
- 12. Troubleshooting Guide
- 13. Warranty and Repair Information
Charging the Battery
1. Open the rubber plug on the YS600 and connect the charger to
the battery charging receptacle as shown in the picture.
2. Plug the charger into an electrical power outlet (110V).
3. While the battery is recharging, the LED will stay on red. The
LED light will become green when the battery is completely
recharged (the battery is fully charged after 2 hours).
Note: Only use Dogtra approved Lithium Polymer Battery
chargers designed for the YS600. Non-Dogtra chargers could
potentially damage the unit.
10