Clockaudio ARM 102-C MK2 Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikrofon Clockaudio ARM 102-C MK2. Clockaudio ARM 102-C MK2 10 halaman.

Microphone does not move

up or down

Microphone is picking up

noise as it is being raised

or lowered.

6. Troubleshooting Guide



Check that the DSP control signal is present logic

+2.5 to 12 Volts is required.



Is the microphone motor cable connected?



Is the DC supply to the Controller unit switched on

blue power light should be illuminating?



Check logic input cable connections between DSP

and DSP control ports on the controller unit.



Disconnect and reconnect the power supply to the

controller unit.



This is normal. The microphone must be muted by

the DSP during the raising / lowering transitions.

Note it takes 3 seconds for the microphone to raise /

lower.