Clockaudio ARM 102-C MK2 사용 설명서 - 페이지 7
{카테고리_이름} Clockaudio ARM 102-C MK2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clockaudio ARM 102-C MK2 10 페이지.
Microphone does not move
up or down
Microphone is picking up
noise as it is being raised
or lowered.
6. Troubleshooting Guide
Check that the DSP control signal is present logic
+2.5 to 12 Volts is required.
Is the microphone motor cable connected?
Is the DC supply to the Controller unit switched on
blue power light should be illuminating?
Check logic input cable connections between DSP
and DSP control ports on the controller unit.
Disconnect and reconnect the power supply to the
controller unit.
This is normal. The microphone must be muted by
the DSP during the raising / lowering transitions.
Note it takes 3 seconds for the microphone to raise /
lower.
7