Dogtrace DOG GPS X20 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan Dogtrace DOG GPS X20. Dogtrace DOG GPS X20 19 halaman.

2. By arrows choose the number of the required dog on the receiver main panel.

3. When switched on, move targets of the transmitters and receiver close together

(same as when switching ON) and hold them together for 3 seconds - until you hear

a rising tone.

4. Move the receiver away from the transmitter.

If you have activated the function correctly, the receiver display shows lettering BEEPER

in the main navigation panel. The top line of the display shows lettering BEEPER if this

function is activated on the transmitter of at least one of the dogs.

Sensitivity and BEEPER mode setting

BEEPER distinguishes the movement of the dog or his immobility (drawn game) and

allows three kinds of indication - visual on the display, audible or vibration.

1. In the main navigation panel choose a number of the requiered dog.

2. Press and hold the button BEEPER on the receiver - on the display appears lettering

(M-mode and mode number 0-4).

3. Choose requiered mode according to a table below by arrows

mode number

For a clearer distinction between the state of motion/stillness the sensitivity of the

motion detection can be set.

1. Press again and hold the button BEEPER. Letter

display and the sensitivity level

2. Adjust the sensitivity level by arrows

ie. the device responds to the smaller movements of the dog.

3. Press

to return to the main screen.

Note: The sound and vibration indication can be set to a maximum of 4 dogs vizual

indication is adjustable for 9 dogs. When setting sound and vibration indication,

individual dogs can be recognized by the number of beeps/vibrations (maximum

4 beeps or vibrations), which indicate movement/stillness of the dog. If the

sound and vibration indication are set for more dogs, vibration and sound run

simultaneously.

indication

movement

lettering BEEPER flashes

audible

vibratory

/ . Higher number means higher sensitivity,

stillness

audible

vibratory

(Sensitivity) lights up on the