ASG EasyLine 4G Instalasi dan Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Unit Kontrol ASG EasyLine 4G. ASG EasyLine 4G 16 halaman. Miniature phone line (pstn) simulator

Halaman Cetak

EasyLine 4G

www.ascglobal.eu

Connecting the module (PC)

Connection procedure using a USB adapter

Connect the USB adapter to the connector labeled Program on the module.

1. The USB adapters are able to provide sufficient power supply for the GSM module for programming.

2. Using a USB extension cable, insert the USB connector of the adapter into any USB port on the computer.

3. ATTENTION! For Windows OS, the system will offer to install the driver automatically. It is IMPORTANT that

you do the installation using the USB driver, not the system.

Manually install USB driver in 10 steps

✔ Get the required driver from our website

✔ Use the 32-bit or 64-bit driver compatible with your system for the rest of the installation

✔ Compatibility can be determined in the menu item Control Panel → System

✔ Connect the USB programmer to your computer

✔ Turn off the automatic installation option offered by the system.

✔ Open the Device Manager window under the Control Panel → System → Hardware tab.

✔ In the window that appears here, look for the unknown device that appeared among the other devices

(which in this case is the programmer itself, later it will appear as USB Serial port). If you do not see such a

device, start the "Search for hardware changes" process from the top menu bar of the window.

✔ By double-clicking on the unknown device, the properties of the device will be displayed

✔ Start the driver update function

✔ In the resulting installation window, choose to manually determine the location of the driver, and then select

the directory for the 32-bit or 64-bit version of the driver.

Click the next button and start the installation

4. Open the device manager (by clicking System → Properties → Hardware tab → Device Manager)

5. Find the device labeled USB Serial port (COM...) under Ports

◦ If it is necessary to reinstall the driver, then by clicking on the device here, first click to remove the driver,

then proceed as described in the previous step.

6. Open the programming software

7. You must set the value in the bracket [USB Serial port (COM...)] in the programming software.

8. After this, the name of the module appears next to the Start button after the connected GSM module.

Connection procedure using a BT adapter

Connect the Bluetooth adapter to the GSM module and then power it on.

1. Activate the Bluetooth connection option on your programming device (PC and mobile phone).

2. Search for the programmer using your Bluetooth-enabled device.

3. After finding the adapter, use the default code 1234 to pair your computer, smartphone, or tablet with the

adapter. After pairing, the programmer can be found under the name WiFi/BT Programmer.

4. Find the COM port identification number of the connection

(Usually found under Properties -> Hardware tab)

5. Also set the Port number on the programming software (PC).

6. Connect to the GSM module.

In any case, you can confirm that a successful connection has been established by the name of the connected

GSM module appearing next to the Start button of the programming software, and the green LED on the

programmer starting to flash.