ASG EasyLine 4G Instalasi dan Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Unit Kontrol ASG EasyLine 4G. ASG EasyLine 4G 16 halaman. Miniature phone line (pstn) simulator
Halaman Cetak
• By clicking the Clock Synchronization button on the main page (Basic data tab), the module synchronizes its
internal clock with the computer clock.
• After the device is connected to the GSM network, this synchronization will be performed automatically
through the service provider (if the network supports this service).
• The Read and Send button at the bottom is used to read and change the configuration on the module. These
buttons are available everywhere except the Control phone numbers tab.
It is advisable to use the Send button after all important and larger settings.
Before submitting your settings, please make sure that it does not cause an unexpected alarm. Before doing
so, it is recommended to view the current status of the module (Maintenance tab).
ATTENTION! After connecting, always read the settings first if you want to change them!
• You can restart the module with the Restart button. After monitoring, it is recommended to restart the device.
In the bottom menu bar, you can find out the following:
◦ Communication port number
◦ GSM module name
◦ Firmware version number
◦ A note about the current software operation
◦ ProRead software release number
Checking the status of the module
The current status is diplayed in the
When querying the status of the module, you can find out the following information:
•
Status of inputs
•
Status of outputs
•
Tamper tamper indication
•
Power voltage error indication
•
External telephone line voltage
•
Listing of possible errors/events (e.g.: SIM card not inserted, SIM card locked with PIN code)
•
GSM connection status (e.g.: Registered to network, Roaming, No connection, Connection refused)
•
Current GSM field strength (updated in a few seconds)
EasyLine 4G
Maintance
Display module status
→
www.ascglobal.eu
button.
9