CYP SY-398H Panduan Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Konverter Media CYP SY-398H. CYP SY-398H 16 halaman. Cv & sv to hdmi converter with audio input
Juga untuk CYP SY-398H: Panduan Pengoperasian (13 halaman)
Halaman Cetak
6.5 OSD
INput format/OUTput Resolution
Firmware Information
1. Press the button on the top panel once to switch in between CV/SV. If
the input source is disconnected the OSD will show "No Signal".
2. Press and hold the button on the top panel for 3 seconds to bring up
OSD manual.
3. When the device is in 'PC mode' the OSD will display the input format
and output timing, source detection, PC monitor's EDID and firmware
version as in the above picture.
4. When the device is in 'HD mode' the OSD will display input format
and output timing, frame rate conversion selection, video system and
firmware version as shown in below picture.
10
PC Monitor Information
INput format/OUTput Resolution
Firmware Information