CYP SY-398H 운영 매뉴얼 - 페이지 10
{카테고리_이름} CYP SY-398H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP SY-398H 16 페이지. Cv & sv to hdmi converter with audio input
CYP SY-398H에 대해서도 마찬가지입니다: 운영 매뉴얼 (13 페이지)
페이지 인쇄
6.5 OSD
INput format/OUTput Resolution
Firmware Information
1. Press the button on the top panel once to switch in between CV/SV. If
the input source is disconnected the OSD will show "No Signal".
2. Press and hold the button on the top panel for 3 seconds to bring up
OSD manual.
3. When the device is in 'PC mode' the OSD will display the input format
and output timing, source detection, PC monitor's EDID and firmware
version as in the above picture.
4. When the device is in 'HD mode' the OSD will display input format
and output timing, frame rate conversion selection, video system and
firmware version as shown in below picture.
10
PC Monitor Information
INput format/OUTput Resolution
Firmware Information