CYP CMSI-8H8CV Panduan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengalih Matriks CYP CMSI-8H8CV. CYP CMSI-8H8CV 20 halaman. Hdbaset 4x4/8x8 hdmi matrix over cat5e/6/7
Juga untuk CYP CMSI-8H8CV: Panduan Pengoperasian (20 halaman)

Halaman Cetak

Once in the command line interface (CLI) type "telnet", a space, then

the IP address of the unit you wish to control, a space and "23", then

hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.