CYP CMSI-8H8CV Kullanım Kılavuzu - Sayfa 15

Matris Anahtarlayıcı CYP CMSI-8H8CV için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CMSI-8H8CV 20 sayfaları. Hdbaset 4x4/8x8 hdmi matrix over cat5e/6/7
Ayrıca CYP CMSI-8H8CV için: Kullanım Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Once in the command line interface (CLI) type "telnet", a space, then

the IP address of the unit you wish to control, a space and "23", then

hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.