CYP CMSI-8H8HS Panduan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengalih Matriks CYP CMSI-8H8HS. CYP CMSI-8H8HS 20 halaman. 8x8 hdmi matrix
Juga untuk CYP CMSI-8H8HS: Panduan Pengoperasian (16 halaman), Panduan Pengoperasian (16 halaman)

Halaman Cetak

Once in the command line interface (CLI) type "telnet", the IP address

of the unit you wish to control and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice/three times.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP, type

"RSTIP" and to use a set static IP, type "SETIP".

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.