CYP CMSI-8H8HS Kullanım Kılavuzu - Sayfa 14

Matris Anahtarlayıcı CYP CMSI-8H8HS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CMSI-8H8HS 20 sayfaları. 8x8 hdmi matrix
Ayrıca CYP CMSI-8H8HS için: Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Once in the command line interface (CLI) type "telnet", the IP address

of the unit you wish to control and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice/three times.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP, type

"RSTIP" and to use a set static IP, type "SETIP".

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.