CYP OR-HD88S Panduan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengalih Matriks CYP OR-HD88S. CYP OR-HD88S 20 halaman. 8 x 8 hdmi matrix
Juga untuk CYP OR-HD88S: Panduan Pengoperasian (16 halaman)

Halaman Cetak

Once in the command line interface (CLI) type "telnet", a space, then the

IP address of the unit you wish to control, a space and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's LCM

monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP" to

list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP, type "RSTIP"

and to use a set static IP, type "SETIP" (For a full list of commands, see

Section 6.7).

Note: Any commands will not be executed unless followed by a carriage

return. Commands are not case-sensitive. If the IP is changed then the IP

Address required for Telnet access will also change accordingly.