CYP OR-HD88S 운영 매뉴얼 - 페이지 14

{카테고리_이름} CYP OR-HD88S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP OR-HD88S 20 페이지. 8 x 8 hdmi matrix
CYP OR-HD88S에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

Once in the command line interface (CLI) type "telnet", a space, then the

IP address of the unit you wish to control, a space and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's LCM

monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP" to

list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP, type "RSTIP"

and to use a set static IP, type "SETIP" (For a full list of commands, see

Section 6.7).

Note: Any commands will not be executed unless followed by a carriage

return. Commands are not case-sensitive. If the IP is changed then the IP

Address required for Telnet access will also change accordingly.