Ashcroft 8008 Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Alat Ukur Ashcroft 8008. Ashcroft 8008 2 halaman. Pressure gauge

Halaman Cetak

Installation Instructions

for ASHCROFT

8008

Pressure Gauge

5. FRONT FLANGE AND U-CLAMP MOUNTING

Installation Instructions for 8008 Front Flange Mounting Kit

1. Align any screw hole with gauge fill plug and press flange

onto back of case until it touches front ring. To prevent

warping, press evenly around perimeter of flange as it forms

around case.

2. Drill panel hole for gauge, and drill 3 clearance OR tapped

holes (120° apart) for mounting screws (see table for sizes).

3. Use hardware provided to secure gauge to panel.

NOTE: Use an open end wrench on the gauge process

connection when connecting gauge to pressure source.

Gauge

Kit

Size

Part No.

63mm

101A230-03

2.60˝ (66.0mm)

100mm

101A230-04

4.06˝ (103.0mm) 4.15˝ (105.4mm)

Installation Instructions Type 8008 U-Clamp Mounting Kit

1. Drill panel hole for gauge (see table for sizes).

2. Place gauge through panel. Assemble bracket onto process

connection using square keyway, then shift bracket to

engage into groove of process connection.

3. Install screws (provided) through bracket and tighten onto

panel until gauge is secure (5 - 7 in-lbs).

NOTE: Use an open end wrench on the gauge process

connection when connecting gauge to pressure source.

Gauge

Kit

Size

Part No.

63mm

101A230-01

2.52˝ (64.0mm)

100mm

101A230-02

3.98˝ (101.0mm) 4.02˝ (102.0mm)

All sales subject to standard terms and conditions of sale. I&M008-10248 Letter (8008) 09/16

Panel Hole

Min

Max

2.70˝ (68.8mm)

Panel Hole

Min

Max

2.56˝ (65.0mm)

Bolt

Screw

Circle

Clearance

2.95˝ (75mm)

.150˝ (3.8mm)

4.65˝ (118mm)

.201˝ (5.1mm)

(Panel)

(63mm Bracket)

Panel

Tap Hole/Thread Size

.1065˝/#6-32 UNC

.159˝/#10-32 UNF

(Panel)

(63mm Bracket)

(100mm Bracket)

(100mm Br

(100mm Bracket)