CYP 5-Play HDBaseT PU-507WPRX Panduan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima CYP 5-Play HDBaseT PU-507WPRX. CYP 5-Play HDBaseT PU-507WPRX 16 halaman. 5play hdbaset wall plate receiver (inc. poc & single lan, up to 100m)
Juga untuk CYP 5-Play HDBaseT PU-507WPRX: Panduan Pengoperasian (12 halaman), Panduan Pengoperasian (16 halaman)
Halaman Cetak
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Receiver Front Panel
1
IR 1 EXTENDER: Connect an IR Extender cable for IR signal
reception. Signals received will be transmitted to the transmitter
unit. Ensure that the remote being used is within the direct line-of-
sight of the IR Extender.
2
IR 2 BLASTER: Connect an IR Blaster cable for IR signal transmission.
IR signals received by an IR extender connected to the transmitter
unit will be transmitted by this blaster. Place the IR Blaster in direct
line-of-sight of the equipment to be controlled.
3
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the HDMI source signal.
4
POWER LED: This LED will illuminate when the device is connected
and powered by a compatible transmitter unit via PoC.
5
LINK LED: This LED will illuminate when both the source connected
to the transmitter and the display connected to the receiver are
connected.
3
IR 1
EXTENDER
IR 2
BLASTER
1
2
LINK
POWER
HDMI OUT
3
4 5