CYP 5-Play HDBaseT PU-507WPRX 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP 5-Play HDBaseT PU-507WPRX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP 5-Play HDBaseT PU-507WPRX 16 페이지. 5play hdbaset wall plate receiver (inc. poc & single lan, up to 100m)
CYP 5-Play HDBaseT PU-507WPRX에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지), 운영 매뉴얼 (16 페이지)

페이지 인쇄

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Receiver Front Panel

IR 1 EXTENDER: Connect an IR Extender cable for IR signal

reception. Signals received will be transmitted to the transmitter

unit. Ensure that the remote being used is within the direct line-of-

sight of the IR Extender.

IR 2 BLASTER: Connect an IR Blaster cable for IR signal transmission.

IR signals received by an IR extender connected to the transmitter

unit will be transmitted by this blaster. Place the IR Blaster in direct

line-of-sight of the equipment to be controlled.

HDMI OUT: Connect to a HDMI equipped TV/monitor for display of

the HDMI source signal.

POWER LED: This LED will illuminate when the device is connected

and powered by a compatible transmitter unit via PoC.

LINK LED: This LED will illuminate when both the source connected

to the transmitter and the display connected to the receiver are

connected.

IR 1

EXTENDER

IR 2

BLASTER

LINK

POWER

HDMI OUT

4 5