CYP CA-DVI250R Panduan Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima CYP CA-DVI250R. CYP CA-DVI250R 12 halaman. Dvi over cat5 transmitter & receiver box
Halaman Cetak
5. Features
Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
Support Equalizer, Gain, CTI (Color Transient Improvement) adjustment.
Supports high definition input up to 1080P/UXGA, output resolution follows
input.
Easy to install and simple to operate.
Connect CAT 5 back to DVI without signal loss after 250 meter's
transmission.
Supports DDC/HDCP signal transferring through DDC cable.
Build-in EDID at transmitter
Support both external Coaxial and Stereo Sound.
6. Operation Controls and Functions
6.1 Transmitter's Front Panel
DV I to CA T 5 / TRANSMIT TER
① DVI-D IN – Plug from DVI/HDMI source equipment ' s video output with DVI
in cable.
Note: Duo to this device has build-in EDID therefore, when HDIM ' s audio
signal is send the device may not perform. Hence, it may be adjust from
the HDMI source equipment (eg. DVD play) to set the audio output to
LPCM or AC3 or DTS or ... etc.
② COAX IN – Plug from DVI/HDMI source equipment ' s audio output with
coaxial cable.
Note: This audio signal is received from CAT 5 with SPDIF format and
therefore, LPCM sound will perform 2CH.
③ L/R IN – Plug from DVI/HDMI source equipment ' s audio output with L/R
phone jack cable.
④ AUDIO switch – Switch your audio source by COAX in or L/R in.
Note: When audio source input is bit stream format, L/R output will not
display hence, audio input source should select LPCM for displayable
format. Coaxial output will perform the same signal as to Coaxial inputs ' .
DVI-D
IN
1
COAX
L/R
IN
IN
2
3
2
COAX
L/R
AUDIO
4