CYP CA-DVI250R Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima CYP CA-DVI250R. CYP CA-DVI250R 12 halaman. Dvi over cat5 transmitter & receiver box

Halaman Cetak

6.3 Transmitter's Rear Panel

① with CAT-5/CAT-5E/CAT-6 cable.

② DDC CAT 5 INPUT – Connect the DDC input to the DDC output of the

transmitter with CAT-5/CAT-5E/CAT-6 cable.

Note: For advanced user only, if it's known that the DDC or HDCP data

are required for the source and the display, you can use a single CAT-5

cable for the VIDEO connection only.

③ Power Jack – Connect with 5V / 2.6A power adaptor with power supply.

6.4 Receiver's Rear Panel

CA T5 to DV I

① DVI-D OUT – Connect to DVI/HDMI display equipment with DIV or DVI to

HDMI cable.

② COAX OUT – Connect to audio ampliﬁer or audio equipment ' s input with

coaxial cable.

Note: This audio signal is received from CAT 5 with SPDIF format and

therefore, LPCM sound will perform 2CH.

③ L/R OUT – Connect to audio equipment ' s input with 3.5mm phone jack.

Note: This audio channel will perform Stereo sound only. When Dolby or

DTS signal is send no sound will be performed.

VIDEO

CAT5 OUTPUT

250M

/ RECEIVER

DVI-D

OUT

DDC

COAX

L/R

OUT

DC 5V