CYP PU-506-KIT Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemanjang CYP PU-506-KIT. CYP PU-506-KIT 16 halaman. 3-play hdbaset extender kit (2-way ir, rs-232 & hdmi, up to 100m)
Juga untuk CYP PU-506-KIT: Panduan Pengoperasian (16 halaman)

Halaman Cetak
CYP PU-506-KIT Panduan Pengoperasian

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter Front and Rear Panels

Front
IR2 Extender
RS232 In
IR1 Blaster
1
2
1
RS-232 In: Connect to a PC/laptop or RS-232 enabled device(with
supplied 3.5 mm phone jack to D-Sub 9 pin adaptor) for the
transmission of RS-232 commands.
2
IR2 Extender: Connect to the supplied IR extender cable for IR signal
reception. Ensure that remote controller being used is within the
direct line-of-sight of the IR extender.
3
IR1 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
4
HDMI In: Connect to HDMI source equipment such as a DVD or Blu-
ray player.
5
DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
6
Link: The yellow LED will illuminate when both the input and output
CAT5e/6/7 signals are connected.
7
Power: This green LED will illuminate when the device is connected to
a power supply.
8
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
8
HDMI In
3
4
Rear
7
DC 5V
Power
Link
CAT 5e /6 Out
5
6
8