Cypress MB91460 Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Motherboard Cypress MB91460. Cypress MB91460 20 halaman.
After Flash programming you can disconnect the serial cable and change the settings back to:
Table 6. Jumper and switches on SK91461 Flash Emulation
RES
P15_3
P15_2
INT0
MD0
MD1
MD2
MD3
P21_0
P21_1
P15_3
P15_2
Before starting debug session, you have to edit the procedure file PRC\Emu_FLASH_after_load.prc and set correct
name of your generated abs-file.
# Emu_Flash_after_load.prc
# ========================
#
# 2006-04-24
printf "\nprocedure file : Emu_Flash_after_load.prc\n"
printf "\n*********************************************************"
printf "\n*
printf "\n*
printf "\n*
printf "\n*********************************************************\n"
printf "\nAttention:"
printf "\nPlease use PC-Writer software to program adequeate mhx file"
printf "\n(e.g. STANDALONE\\ABS\\91460_template_91461r.mhx) to external
Flash memory!"
RESET
printf "\n\n-------------------------"
printf "\nload debug information for project programmed to Flash\n"
LOAD/DEBUG STANDALONE\ABS\91460_template_91461r.abs
www.cypress.com
Name (Switches)
Name (Jumpers)
V1.0 MVo
MB91461 Standalone Emulation with external FLASH
Document No. 002-05206 Rev. *C
FR Family MB91460 Series MB91461R Emulation
Setting
ICE
Don't care
Don't care
Don't care
H
L
L
L
Setting
Don't care
Don't care
Don't care
Don't care
*"
*"
*"
10