Cypress MB91460 매뉴얼 - 페이지 11

{카테고리_이름} Cypress MB91460에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress MB91460 20 페이지.

After Flash programming you can disconnect the serial cable and change the settings back to:

Table 6. Jumper and switches on SK91461 Flash Emulation

RES

P15_3

P15_2

INT0

MD0

MD1

MD2

MD3

P21_0

P21_1

P15_3

P15_2

Before starting debug session, you have to edit the procedure file PRC\Emu_FLASH_after_load.prc and set correct

name of your generated abs-file.

# Emu_Flash_after_load.prc

# ========================

# 2006-04-24

printf "\nprocedure file : Emu_Flash_after_load.prc\n"

printf "\n*********************************************************"

printf "\n*

printf "\n*********************************************************\n"

printf "\nAttention:"

printf "\nPlease use PC-Writer software to program adequeate mhx file"

printf "\n(e.g. STANDALONE\\ABS\\91460_template_91461r.mhx) to external

Flash memory!"

RESET

printf "\n\n-------------------------"

printf "\nload debug information for project programmed to Flash\n"

LOAD/DEBUG STANDALONE\ABS\91460_template_91461r.abs

www.cypress.com

Name (Switches)

Name (Jumpers)

V1.0 MVo

MB91461 Standalone Emulation with external FLASH

Document No. 002-05206 Rev. *C

FR Family MB91460 Series MB91461R Emulation

Setting

ICE

Don't care

Setting

Don't care