Cypress CA-DVI100R Panduan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima Cypress CA-DVI100R. Cypress CA-DVI100R 12 halaman. Dvi over cat5 receiver box
Juga untuk Cypress CA-DVI100R: Panduan Pengoperasian (8 halaman)
Halaman Cetak
6.2 Transmitter's Rear Panel
① VIDEO CAT5 OUTPUT-connect the VIDEO output to the VIDEO input of
receiver with CAT-5/CAT-5E cable.
② Power Jack – Connect with 5V / 2.6A power adaptor with power supply.
Note: 1.When using video connector only for signal transmit with
transmitter and receiver, the DVI-D output signal will have auto
HDCP protection.
2.When using bothe video and DDC connector for signal transmit
with transmitter and receiver, the DVI-D output signal's HDCP
protection will depend on input signal.
● Input with HDCP protection, Output with HDCP protection.
● Input without HDCP protection, Output without HDCP protection.
6.3 Receiver's Front Panel
① EQUALIZER – Use this switch to adjust Sharpness/Peak over long distance
by turning right or left.
② GAIN – Use this switch to adjust Brightness/Contrast by turning right or left.
③ VIDEO CAT 5 INPUT – Connect the VIDEO input to the Video output of the
transmitter with CAT-5/CAT-5E cable.
(Suggest using solid UTP CAT5 cable for better performance)
④ Power Jack – Connect with 5V / 2.6A power adaptor with power supply.
VIDEO
CAT5 OUTPUT
1
EQUALIZER GAIN
MIN
MAX
ADJUST
1
2
DDC
VIDEO
DDC
CAT5 INPUT
3
3
DC 5V
2
DC 5V
4