- ページ 6

レシーバー Cypress CA-DVI100RのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Cypress CA-DVI100R 12 ページ。 Dvi over cat5 receiver box
Cypress CA-DVI100R にも：操作マニュアル (8 ページ)

ページを印刷する

6.2 Transmitter's Rear Panel

① VIDEO CAT5 OUTPUT-connect the VIDEO output to the VIDEO input of

receiver with CAT-5/CAT-5E cable.

② Power Jack – Connect with 5V / 2.6A power adaptor with power supply.

Note: 1.When using video connector only for signal transmit with

transmitter and receiver, the DVI-D output signal will have auto

HDCP protection.

2.When using bothe video and DDC connector for signal transmit

with transmitter and receiver, the DVI-D output signal's HDCP

protection will depend on input signal.

● Input with HDCP protection, Output with HDCP protection.

● Input without HDCP protection, Output without HDCP protection.

6.3 Receiver's Front Panel

① EQUALIZER – Use this switch to adjust Sharpness/Peak over long distance

by turning right or left.

② GAIN – Use this switch to adjust Brightness/Contrast by turning right or left.

③ VIDEO CAT 5 INPUT – Connect the VIDEO input to the Video output of the

transmitter with CAT-5/CAT-5E cable.

(Suggest using solid UTP CAT5 cable for better performance)

④ Power Jack – Connect with 5V / 2.6A power adaptor with power supply.

VIDEO

CAT5 OUTPUT

EQUALIZER GAIN

MIN

MAX

ADJUST

DDC

VIDEO

DDC

CAT5 INPUT

DC 5V