Asimed MB201 Plus C Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan Asimed MB201 Plus C. Asimed MB201 Plus C 10 halaman. Personal scale

INSTALLATION INSTRUCTIONS

IS CASE THE SCALE IS NOT SENT ASSEMBLED

All parts have been verified in our factory and can be easily assembled

according to the following instructions:

1. Put the base on the floor.

2. Put the pillar on to the base, aligning the three holes with the three

ones on the base (figure 1). Put the screws and press them with

the allen key.

Pillar

Base

Plate

1. Incline the scale in order to accede to the inner part of the base,

avoiding hits. Hook the transmission rod in the hole of the lever

extension, pushing it towards the lower hook of the transmission

rod (figure 2).

Once this operation is made, the scale is assembled. Put the scale

in your working place in vertical position.

NOTE

The transmission rod must move freely in the body of the pillar. This

can be seen through the upper opening existing between the pillar

and the head of the scale. (figure 3).

User's Manual

(figure 1)

(figure 2)

Lever extension

Transmission rod

Lower hook of the

transmisión rod

(figure 3)