Asimed MB201 Plus C Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan Asimed MB201 Plus C. Asimed MB201 Plus C 10 halaman. Personal scale

GUIDE TO RESOLVE PROBLEMS

The exactness of these scales when they are calibrated in out factory

is + / - 100 grams. This means that between two scales you may find

deviations of 200 g. In spite of this, they would be in their tolerances.

In order to obtain a more exact weight, checking first the scale is on

a steady surface, go up on to the centre of the plate. If the error still

seems excessive, revise the following:

B A L A N C E

The pointer of the graduated rule

does not stop in the centre of the

limitative rectangle when both

counterweights are in zero.

TILTABLE ARM DOES NOT MOVE FREELY

The pointer touches the limitative

rectangle in some point of its travel

(figure 4).

THE PLATE SWAYS TOO MUCH OR TOUCHES THE BASE IN A

CORNER

When leaning your thumbs on two

opposite corners of the plate, pressing

alternatively with each finger, you

notice the plate wobbles.

User's Manual

O F

T H E

CAUSE

G R A D U A T E D

Check that both counterweights are

well adjusted into their zero mortises. If

necessary, adjust mobile counterweights

too. (figure 4).

If this is the case, align the graduated

rule again.

Raise the plate several times and let

it fall until it is totally settled.

Go up and down on the plate several

times so that all parts of it are

properly settled. (This solution is

more advisable so that all parts that

compose the scale do not suffer any

damages)

R U L E

I N

Z E R O S

SOLUTION