Cyrus CD i Petunjuk Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Sistem stereo Cyrus CD i. Cyrus CD i 15 halaman. Hi-fi
Juga untuk Cyrus CD i: Petunjuk Pengguna (18 halaman)

Halaman Cetak

Cyrus CD i

TROuBlEShOOTING GuIdE

If your CD i is not operating properly, disconnect the power and check

all connections using the notes in this handbook. If problems persist, the

checklist below may help.

If you are in any doubt, consult your dealer.

Disc Spinning with no

Switch off the power to the audio system

sound

and check that connections have been

correctly made from the CD i to the

amplifier.

If used with an external D/A converter,

check the connection from the 'DIGITAL

OUT' socket of the CD i to the D/A

converter. Check also that power is

applied to the D/A converter and amplifier

and that the input selection and volume

control of these units is correctly set.

Pause may have been set. Check for the

pause symbol on the display. Press the

PLAY/PAUSE key again on the front panel

or handset to cancel pause.

Skipping tracks or

The disc may be dirty or badly scratched.

distorted sound

Try playing another disc. If the other disc

plays ok, try cleaning the 1st disc.

Indication 'Disc error' on

The disc will not read. It may be dirty or

the display

defective.

No display

The display may have been switched off at

the handset. Press the display key again

to restore the display and backlight.

No Remote Operation

The handset may not be set to control

the CD i. Press the

commands.

The handset batteries may need to be

replaced:

Remove the battery compartment cover

located underneath the unit. Remove

the batteries and replace with new ones

carefully noting the orientation marked in

the bottom of the battery case.

The batteries in the unit should only be

replaced with new batteries type AAA

(I.E.C. LR03).

SPECIfICATIONS

Power Supply

Voltage: ..............................................................As plate on rear of unit

Power Consumption ........................................................................12W

EMC & Safety Compliance (230V) .......................................................CE

Enclosure

Dimensions (WxHxD) ................................................ 215 x 75 x 365mm

Weight ............................................................................................. 3kg

Material ........................................................................Die cast chassis

Audio Performance

Output Level ............................................................................2.1V rms

Output Impedance .........................................................................50 Ω

Frequency Response ..........................................20-20,000Hz ±0.25dB

Channel Separation ..................................................... >100dB @ 1kHz

SNR (using silent track) ........................................................... >104dBA

THD @ -10dB ............................................................................0.003%

Disc compatibility ..........................................................CD Audio, CD-R

Cyrus reserves the right to change all specifications without notice. E &OE

laser product

This label on the rear panel tells you that

the unit contains a Laser component.

Opening this unit will expose the user to

radiation from the laser beam.

button and retry

User Instructions

>90dB@20kHz