Cyrus CD i Instruções para o utilizador - Página 13
Procurar online ou descarregar pdf Instruções para o utilizador para Sistema estéreo Cyrus CD i. Cyrus CD i 15 páginas. Hi-fi
Também para Cyrus CD i: Instruções para o utilizador (18 páginas)
Imprimir páginaCyrus CD i
TROuBlEShOOTING GuIdE
If your CD i is not operating properly, disconnect the power and check
all connections using the notes in this handbook. If problems persist, the
checklist below may help.
If you are in any doubt, consult your dealer.
Disc Spinning with no
Switch off the power to the audio system
sound
and check that connections have been
correctly made from the CD i to the
amplifier.
If used with an external D/A converter,
check the connection from the 'DIGITAL
OUT' socket of the CD i to the D/A
converter. Check also that power is
applied to the D/A converter and amplifier
and that the input selection and volume
control of these units is correctly set.
Pause may have been set. Check for the
pause symbol on the display. Press the
PLAY/PAUSE key again on the front panel
or handset to cancel pause.
Skipping tracks or
The disc may be dirty or badly scratched.
distorted sound
Try playing another disc. If the other disc
plays ok, try cleaning the 1st disc.
Indication 'Disc error' on
The disc will not read. It may be dirty or
the display
defective.
No display
The display may have been switched off at
the handset. Press the display key again
to restore the display and backlight.
No Remote Operation
The handset may not be set to control
the CD i. Press the
commands.
The handset batteries may need to be
replaced:
Remove the battery compartment cover
located underneath the unit. Remove
the batteries and replace with new ones
carefully noting the orientation marked in
the bottom of the battery case.
The batteries in the unit should only be
replaced with new batteries type AAA
(I.E.C. LR03).
SPECIfICATIONS
Power Supply
Voltage: ..............................................................As plate on rear of unit
Power Consumption ........................................................................12W
EMC & Safety Compliance (230V) .......................................................CE
Enclosure
Dimensions (WxHxD) ................................................ 215 x 75 x 365mm
Weight ............................................................................................. 3kg
Material ........................................................................Die cast chassis
Audio Performance
Output Level ............................................................................2.1V rms
Output Impedance .........................................................................50 Ω
Frequency Response ..........................................20-20,000Hz ±0.25dB
Channel Separation ..................................................... >100dB @ 1kHz
SNR (using silent track) ........................................................... >104dBA
THD @ -10dB ............................................................................0.003%
Disc compatibility ..........................................................CD Audio, CD-R
Cyrus reserves the right to change all specifications without notice. E &OE
laser product
This label on the rear panel tells you that
the unit contains a Laser component.
Opening this unit will expose the user to
radiation from the laser beam.
button and retry
11
User Instructions
>90dB@20kHz