Cyrusher XF 800 Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Sepeda Cyrusher XF 800. Cyrusher XF 800 19 halaman.
Halaman Cetak
Cyrusher Sports Team
www.cyrusher.com
Press
switch to P5,
press
or
to change data required.
This technical setting is only for engineer setting, do not modify or change the setting.
Please note above setting from 8 to 10, need to press
one time or hold on for 2
seconds to turn off after each setting to save changed data. If no movement on setting
button over 1 minute, the bike computer will go to the default working screen and all
your changed setting data will not be saved.
C Level Setting Code
Operation
After P Level Setting, press
+
together for 2 seconds to enter the C Level
Code setting model.
C1. PAS Sensor Sensitivity Setting
Range: 0-07; XF800 default code is 07;
press
or
to change data required.
When you see C1 is flashing,
This technical setting is only for engineer setting, do not modify or change the setting.
C2. Motor Phase Setting
Range: 0-7, XF800 default code is 0;
press
or
to change data required.
Press
switch to C2,
This technical setting is only for engineer setting, do not modify or change the setting.
11 / 18