Cyrusher XF 800 사용자 설명서 - 페이지 11
{카테고리_이름} Cyrusher XF 800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrusher XF 800 19 페이지.
페이지 인쇄
Cyrusher Sports Team
www.cyrusher.com
Press
switch to P5,
press
or
to change data required.
This technical setting is only for engineer setting, do not modify or change the setting.
Please note above setting from 8 to 10, need to press
one time or hold on for 2
seconds to turn off after each setting to save changed data. If no movement on setting
button over 1 minute, the bike computer will go to the default working screen and all
your changed setting data will not be saved.
C Level Setting Code
Operation
After P Level Setting, press
+
together for 2 seconds to enter the C Level
Code setting model.
C1. PAS Sensor Sensitivity Setting
Range: 0-07; XF800 default code is 07;
press
or
to change data required.
When you see C1 is flashing,
This technical setting is only for engineer setting, do not modify or change the setting.
C2. Motor Phase Setting
Range: 0-7, XF800 default code is 0;
press
or
to change data required.
Press
switch to C2,
This technical setting is only for engineer setting, do not modify or change the setting.
11 / 18